Electric Heating Mat

In contrast to traditional floor heating, electric heating mats are not embedded in the blind concrete layer but in the tile adhesive. This significantly shortens the time needed for heating; therefore; overheating due to the mass of the concrete can be avoided.

About the BVF Heating Mat

Fast & Simple Solution

The BVF H-MAT twin core heating mats have connection points only on one side. There is no need for any complicated preliminary design, nor for special order of layers for the installation.

Maintenance Free

BVF electric mats do not require maintenance or hidden warranty reviews. They can be put into operation immediately after installation/handover; and due to their multiple insulation, they can be completely detached from environmental influences

Smart Control

The BVF H-MAT heating mats are always controlled by a double sensor thermostat. The thermostat simultaneously controls the optimal temperature of the floor, while the built-in sensor controls the desired room temperature.

The thickness of the BVF H-MAT electric heating mat is only 3.8mm, so unlike conventional heating cables, it is possible to build individual and additional comfort floor heating without raising the floor level, since the tile adhesive or the floor levelling layer should be at least as thick as this.

After installation, the heating mat floor heating system can be put into operation immediately, and it can be connected directly to the thermostat with a 2.5m long factory-installed connection cable. Thanks to Twin- Conductor technology, it needs to be connected to one terminal only.

Whether it is a new heating system or only a floor replacement, the installation is easy. For bathrooms, regardless of the real heat demand, we recommend heating mats with a larger product capacity (150W/m2) for quick and dynamic heating.